A: Pumpable solutions, emulsions, suspensions, extracts and paste-like feeds can be processed within the selected model's operating range.

A: LPG is suited to general centrifugal spray drying, while ZLPG is designed for traditional Chinese medicine extracts and similar high-viscosity or heat-sensitive feeds.

A: Yes. The short drying time is suitable for many heat-sensitive feeds when the operating conditions are correctly established.

A: Yes. Representative samples can be tested to establish atomization behavior, drying conditions and powder characteristics.

A: Provide the material and feed form, viscosity, solids content, initial and target moisture, capacity, heat source, target powder and collection requirements.

A: Powders, wet granules, crystals and particulate materials that maintain stable fluidization without excessive sticking or agglomeration are suitable candidates.

A: GZQ/ZLG provides vibration-assisted continuous drying or cooling; XF provides horizontal continuous fluid-bed drying; GFG provides sealed negative-pressure batch drying.

A: No. Vibrating and horizontal systems can operate continuously, while GFG and FG operate as batch dryers in vertical vessels.

A: Yes. Vibrating fluid-bed lines can combine drying and cooling for suitable products.

A: Provide the material, particle-size range, bulk density, initial and target moisture, capacity, heat sensitivity, stickiness, dust characteristics, heat source and cooling duty.

A: Vacuum drying is suitable when a lower boiling point, reduced exposure to air, sealed processing or dedicated vapor handling is required.

A: No. Vacuum lowers the boiling point, while the actual operating temperature is selected according to the material, heat source and equipment range.

A: Yes. Condensation and recovery equipment can be integrated according to the solvent, operating conditions and recovery target.

A: SZG tumbles free-flowing powders, granules and crystals, while ZPG stirs powders, pastes, slurries and filter cakes.

A: YZG/FZG static vacuum dryers are designed for tray-loaded, small-batch, multi-product and heat-sensitive materials.